 |
| 5534 Mate Photo 1 |
|
|
|
EasyMark™ 5 -In-1 Tooling Kit from Mate Precision Tooling is a thick turret application tooling system for machines without a bottom stroke forming feature. Using the programming software in a CNC punch press, this extremely versatile tool system can be set up to automatically perform any of the following five marking operations:
1 – Write numbers, dates and other important identifying information on a part surface using a special marker. No penetration or metal removal is involved when using the tool in this mode. The special marker does not dry out for two weeks or more and the marked information is later erasable if desired.
2 – Etch the sheet metal surface with permanent marking information in this mode using one of two (120° and 150°) supplied diamond inserts.
3 – Cut or scribe protective film on sheet metal surfaces in this mode using a supplied brass insert to expose localized areas on the part without damaging underlying metal material.
4 – Create cone-shaped indentations (center point down) on the part surface to locate the part with other components for later assembly.
5 – Perform high-speed dot-matrix marking in this mode using a supplied carbide insert.
The EasyMark kit contains all components and tools for setup into all five of the above described marking modes. These include special A-Station guide and canister, marker pen, 1 brass, 1 carbide and 2 diamond inserts, 3 types of springs for the diamond and brass inserts, roller ball and blank dies.
|
| We are collecting readers' comment for improving our website. If you are willing to help, please CLICK HERE to complete a survey. Your comments matter. |
|
|
|
|
| Copyright © Adsale Publishing Limited. Any party needs to reprint any part of the content should get the written approval from Adsale Publishing Ltd and quote the source "Chinamac Journal (CMJ)", Adsale Machine-Building Website - www.AdsaleCMJ.com. We reserve the right to take legal action against any party who reprints any part of this article without acknowledgement. For enquiry, please contact Editorial Department. |
Write a mail to the editor : 
